wallich reticulum config
Date: 2026-02-08
Component: meshchat (reticulum)
@KayDub: Meschat config
Below a meshchat config file for comparison
# This is the default Reticulum config file.
# You should probably edit it to include any additional,
# interfaces and settings you might need.
# Only the most basic options are included in this default
# configuration. To see a more verbose, and much longer,
# configuration example, you can run the command:
# rnsd --exampleconfig
[reticulum]
# If you enable Transport, your system will route traffic
# for other peers, pass announces and serve path requests.
# This should only be done for systems that are suited to
# act as transport nodes, ie. if they are stationary and
# always-on. This directive is optional and can be removed
# for brevity.
enable_transport = False
# By default, the first program to launch the Reticulum
# Network Stack will create a shared instance, that other
# programs can communicate with. Only the shared instance
# opens all the configured interfaces directly, and other
# local programs communicate with the shared instance over
# a local socket. This is completely transparent to the
# user, and should generally be turned on. This directive
# is optional and can be removed for brevity.
share_instance = Yes
# If you want to run multiple *different* shared instances
# on the same system, you will need to specify different
# instance names for each. On platforms supporting domain
# sockets, this can be done with the instance_name option:
instance_name = default
discover_interfaces = True
autoconnect_discovered_interfaces = 3
# Some platforms don't support domain sockets, and if that
# is the case, you can isolate different instances by
# specifying a unique set of ports for each:
# shared_instance_port = 37428
# instance_control_port = 37429
# If you want to explicitly use TCP for shared instance
# communication, instead of domain sockets, this is also
# possible, by using the following option:
# shared_instance_type = tcp
# You can configure Reticulum to panic and forcibly close
# if an unrecoverable interface error occurs, such as the
# hardware device for an interface disappearing. This is
# an optional directive, and can be left out for brevity.
# This behaviour is disabled by default.
# panic_on_interface_error = No
[logging]
# Valid log levels are 0 through 7:
# 0: Log only critical information
# 1: Log errors and lower log levels
# 2: Log warnings and lower log levels
# 3: Log notices and lower log levels
# 4: Log info and lower (this is the default)
# 5: Verbose logging
# 6: Debug logging
# 7: Extreme logging
loglevel = 4
# The interfaces section defines the physical and virtual
# interfaces Reticulum will use to communicate on. This
# section will contain examples for a variety of interface
# types. You can modify these or use them as a basis for
# your own config, or simply remove the unused ones.
[interfaces]
# This interface enables communication with other
# link-local Reticulum nodes over UDP. It does not
# need any functional IP infrastructure like routers
# or DHCP servers, but will require that at least link-
# local IPv6 is enabled in your operating system, which
# should be enabled by default in almost any OS. See
# the Reticulum Manual for more configuration options.
# KMW commented out via one guide
# [[Default Interface]]
# type = AutoInterface
# enabled = Yes
### KMW additions
# TCP/IP interface to ComSec RD node
# KMW Down 11/20/25
# [[RNS COMSECRD]]
# type = TCPClientInterface
# enabled = yes
# target_host = 80.78.23.249
# target_port = 4242
# TCP/IP interface to the Dublin Hub
[[RNS Testnet Dublin]]
type = TCPClientInterface
enabled = yes
target_host = dublin.connect.reticulum.network
target_port = 4965
name = RNS Testnet Dublin
selected_interface_mode = 1
configured_bitrate = None
# TCP/IP interface to the BetweenTheBorders Hub (community-provided)
[[RNS Testnet BetweenTheBorders]]
type = TCPClientInterface
enabled = yes
target_host = reticulum.betweentheborders.com
target_port = 4242
name = RNS Testnet BetweenTheBorders
selected_interface_mode = 1
configured_bitrate = None
# Added from: https://reticulum.network/connect_pl.html
# These are community-provided public Reticulum
# entrypoints available over the public Internet.
[[Spaceman-ygg]]
type = TCPClientInterface
enabled = false
target_host = 201:e73a:61ee:ca68:4bc5:99d5:fd70:ded1
target_port = 4343
name = Spaceman-ygg
selected_interface_mode = 1
configured_bitrate = None
[[Sydney RNS]]
type = TCPClientInterface
enabled = true
target_host = sydney.reticulum.au
target_port = 4242
name = Sydney RNS
selected_interface_mode = 1
configured_bitrate = None
[[dismails TCP Interface]]
type = TCPClientInterface
interface_enabled = false
target_host = rns.dismail.de
target_port = 7822
name = dismails TCP Interface
selected_interface_mode = 1
configured_bitrate = None
[[interloper node]]
type = TCPClientInterface
interface_enabled = true
target_host = intr.cx
target_port = 4242
name = interloper node
selected_interface_mode = 1
configured_bitrate = None
[[noDNS1]]
type = TCPClientInterface
interface_enabled = true
target_host = 202.61.243.41
target_port = 4965
name = noDNS1
selected_interface_mode = 1
configured_bitrate = None
[[The Outpost]]
type = TCPClientInterface
interface_enabled = false
target_host = theoutpost.life
target_port = 4242
name = The Outpost
selected_interface_mode = 1
configured_bitrate = None
[[Beleth RNS Hub]]
type = TCPClientInterface
interface_enabled = true
target_host = rns.beleth.net
target_port = 4242
name = Beleth RNS Hub
selected_interface_mode = 1
configured_bitrate = None
[[Rocket Tech Hub]]
type = TCPClientInterface
enabled = false
target_host = reticulum.rocket-tech.net
target_port = 443
name = Rocket Tech Hub
selected_interface_mode = 1
configured_bitrate = None
[[SparkN0de]]
type = TCPClientInterface
interface_enabled = true
target_host = aspark.uber.space
target_port = 44860
name = SparkN0de
selected_interface_mode = 1
configured_bitrate = None
[[Tidudanka.com]]
type = TCPClientInterface
enabled = false
target_host = reticulum.tidudanka.com
target_port = 37500
name = Tidudanka.com
selected_interface_mode = 1
configured_bitrate = None
[[quad4net tcp]]
type = TCPClientInterface
enabled = yes
target_host = rns.quad4.io
target_port = 4242
name = quad4net tcp
selected_interface_mode = 1
configured_bitrate = None
[[nisa-node]]
type = TCPClientInterface
enabled = false
target_host = nisa.cat
target_port = 4242
name = nisa-node
selected_interface_mode = 1
configured_bitrate = None
[[acehoss]]
type = TCPClientInterface
enabled = yes
target_host = rns.acehoss.net
target_port = 4242
name = acehoss
selected_interface_mode = 1
configured_bitrate = None
[[RNS Testnet StoppedCold]]
type = TCPClientInterface
enabled = yes
target_host = rns.stoppedcold.com
target_port = 4242
name = RNS Testnet StoppedCold
selected_interface_mode = 1
configured_bitrate = None
[[RNS COMSEC-RD]]
type = TCPClientInterface
enabled = false
target_host = 80.78.23.249
target_port = 4242
name = RNS COMSEC-RD
selected_interface_mode = 1
configured_bitrate = None
[[R-Net TCP]]
type = TCPClientInterface
enabled = yes
target_host = istanbul.reserve.network
target_port = 9034
name = R-Net TCP
selected_interface_mode = 1
configured_bitrate = None
[[RNS TCP Node Germany 001]]
type = TCPClientInterface
enabled = true
target_host = 202.61.243.41
target_port = 4965
name = RNS TCP Node Germany 001
selected_interface_mode = 1
configured_bitrate = None
[[RNS TCP Node Germany 002]]
type = TCPClientInterface
enabled = true
target_host = 193.26.158.230
target_port = 4965
name = RNS TCP Node Germany 002
selected_interface_mode = 1
configured_bitrate = None
[[Quortal TCP Node]]
type = TCPClientInterface
enabled = true
target_host = reticulum.qortal.link
target_port = 4242
name = Quortal TCP Node
selected_interface_mode = 1
configured_bitrate = None
[[mobilefabrik TCP]]
type = TCPClientInterface
enabled = true
target_host = phantom.mobilefabrik.com
target_port = 4242
name = mobilefabrik TCP
selected_interface_mode = 1
configured_bitrate = None
[[g00n.cloud Hub]]
type = TCPClientInterface
enabled = true
target_host = dfw.us.g00n.cloud
target_port = 6969
name = g00n.cloud Hub
selected_interface_mode = 1
configured_bitrate = None
[[RNS_Transport_US-East]]
type = TCPClientInterface
interface_enabled = true
target_host = 45.77.109.86
target_port = 4965
name = RNS_Transport_US-East
selected_interface_mode = 1
configured_bitrate = None
[[rothbard_RNS_transport_ZA]]
type = TCPClientInterface
enabled = false
target_host = rothbard.lab.networks.deavmi.assigned.network
target_port = 4242
name = rothbard_RNS_transport_ZA
selected_interface_mode = 1
configured_bitrate = None
[[rothbard_RNS_transport_ZA_ygg]]
type = TCPClientInterface
enabled = false
target_host = 200:73eb:2e4:14be:aac7:90b3:784b:71a3
target_port = 4242
name = rothbard_RNS_transport_ZA_ygg
selected_interface_mode = 1
configured_bitrate = None
[[RNS Quad4]]
type = TCPClientInterface
enabled = yes
target_host = rns.quad4.io
target_port = 4242
name = RNS Quad4
selected_interface_mode = 1
configured_bitrate = None
[[RNS Acehoss]]
type = TCPClientInterface
enabled = yes
target_host = rns.acehoss.net
target_port = 4242
name = RNS Acehoss
selected_interface_mode = 1
configured_bitrate = None
# Ham dude node
[[reticulum.n7ekb.net]]
type = TCPClientInterface
mode = gateway
enabled = yes
target_host = reticulum.n7ekb.net
target_port = 48086
name = reticulum.n7ekb.net
selected_interface_mode = 6
configured_bitrate = None
#I2P Interfaces
[[RNS Oren I2P]]
type = I2PInterface
enabled = yes
peers = q6qth2xl5fisekhvm2lbplprwaof4plkbh4cthjnlj2pck7ahp5q.b32.i2p
name = RNS Oren I2P
selected_interface_mode = 1
storagepath = /home/wallich/.reticulum/storage
ifac_netname = None
ifac_netkey = None
[[SparkN0de I2P]]
type = I2PInterface
enabled = yes
peers = ccrlk4gdxkgrqr633b4msujteaf7gnqw5akxjiek5dhoosfmrdka.b32.i2p
name = SparkN0de I2P
selected_interface_mode = 1
storagepath = /home/wallich/.reticulum/storage
ifac_netname = None
ifac_netkey = None
[[rothbard_RNS_transport_ZA_i2p]]
type = I2PInterface
enabled = yes
peers = guuahj7pyb6ksmjv2bqrjg4cs2wou6cor3ivsi6crntqbzsxnbna.b32.i2p
name = rothbard_RNS_transport_ZA_i2p
selected_interface_mode = 1
storagepath = /home/wallich/.reticulum/storage
ifac_netname = None
ifac_netkey = None
[[4c3ePiNode]]
type = I2PInterface
interface_enabled = yes
peers = re2ct667tpclusj4neu2yz6i2kqp23tnbldbiexiohund2gw2yrq.b32.i2p
name = 4c3ePiNode
ifac_size = 0
selected_interface_mode = 1
storagepath = /home/wallich/.reticulum/storage
ifac_netname = None
ifac_netkey = None
[[Heltec B707]]
type = RNodeInterface
interface_enabled = true
port = /dev/ttyUSB0
frequency = 914875000
bandwidth = 250000
txpower = 17
spreadingfactor = 11
codingrate = 5